contractor repairing well pump
A well pump is a critical component of well systems as it helps deliver pressure water from the well to your home. Unfortunately, they can malfunction due to age and wear and tear. When this happens, you may need to repair your well pump to restore their access to clean and safe running water.

To ensure that your repairs are done correctly, you must hire an experienced professional to do the job correctly and safely. Need a hand in well pump repair? Read this article to see how we can help you solve your issues!

What is a Well Pump?  

A well pump is a device used to extract water from an underground well or borehole. It uses electric motors to power the water up and out of the well, usually through pipes or hoses. It operates on the electromechanical energy conversion principle, pressuring the well and transferring water pressure from depths up to several hundred feet.

Depending on the well, different types of pumping systems may be installed, including a jet pump (which is often used for shallow-dug wells), submersible pumps (which are ideal for deep wells), and centrifugal pumps (which are best for applications requiring high pressure).

What are the Different Types of Well Pumps?

There are three main types of well pumps: submersible pumps, jet pumps, and centrifugal pumps.

  • Submersible Well Pump:

They are the most common type installed today. They are submerged in the well and use electric current to pump water to a pressure tank or directly into your system.

  • Jet Well Pump:

A jet pump operates with the help of pressurized air injected into the well pipe alongside water, allowing it to flow out of the well at a higher rate than what could be expected from any other type.

  • Centrifugal Well Pump:

These use an impeller to increase the well water, sending it directly into your plumbing system.

well pump types

How Long do Well Pumps Last?  

A well pump lasts five to ten years, depending on the well type, usage, and maintenance. The best way to extend the life of your well pump is to ensure it is well-maintained and serviced regularly by an experienced professional who can identify potential problems before they become serious.

Why is Repairing a Water Well Pump Important?  

Repairs and maintenance of your well pump and pressure tank are critical to ensure that your well runs efficiently and safely. When they malfunction, it can cause an interruption in your water supply, leading to costly repairs and dangerous situations such as flooding.

Repairing your well water pump and pressure tank helps prevent contamination by ensuring all components function correctly, such as your pressure switch, faucet, and well tank.

In addition, regular maintenance and checks can help you catch any potential problems before they become serious, saving you time and money in the long run.

Can a Well Pump Be Repaired?  

Yes, well pumps can be repaired in most cases. It is essential to have them inspected by an experienced specialist who can determine the cause of the issue and recommend the best course of action.

Repairs typically involve:

  • Replacing faulty or worn parts.

  • Adjusting components and pressure.

Replacing the well pump if necessary.

What Can Damage A Well Pump?  

Common causes of well pump damage include the following:

  • Power outages can cause damage due to the lack of electricity needed to run the well pump and pressure tank.

  • Surges of excessive voltage can occur when too much electricity passes through the wiring and circuit breaker in a well pump system. This can cause the components to break down or malfunction as they cannot handle an overload of power.

  • Corrosion can cause failure due to rusting or clogged parts caused by debris or minerals building up on the components’ interior.

  • Improper installation or maintenance can malfunction due to incorrect wiring or problems with seals or gaskets on the foot valve, check valve, hand pumps, and pump pressure switch.

Overusing can also lead to failure as they are only designed for so much use before their components wear down from excessive well pump pressure. It is important to note that you should only use them as necessary to prolong their lifespan.

An old blue well

What Are The Common Signs A Well Pump Should Be Repaired?  

It is essential to get repairs as soon as possible when it malfunctions or stops working correctly. They can malfunction for various reasons, such as insufficient water flow, excessive noise when the pump runs incessantly, or a broken tank and pressure switch.

Suppose you notice any of these pump issues. In that case, it is best to inspect immediately by an experienced specialist who can identify and fix the problem quickly and efficiently.

How Often Do Well Pumps Fail?

A well pump can fail for various reasons, and it is impossible to determine how often they fail. However, well pump failure is more likely due to poor maintenance or inadequate installation than any other cause.

Regular inspections and maintenance should be done at least once a year to detect potential issues before they become serious problems.

Is it Hard to Repair A Well Pump? 

Repairing a well water pump can be challenging, requiring specialized knowledge and skills. It is always best to consult an experienced specialist who is well-versed in the latest well-system technologies and techniques.

How Long Does Well Pump Repair Typically Take?  

Repair time varies depending on the severity of the problem. Generally, repairs can take a few hours to several days, depending on how extensive the repairs are and what parts need to be replaced. However, experienced specialists can often diagnose and fix much faster than average.

How Much Does it Cost to Fix A Well Pump?  

The repair costs depend on the problem’s severity, the type of work required, and even your location (urban or rural areas). Generally, these issues need repairs ranging from a few hundred to several thousand dollars. It is essential to get quotations from specialists to compare prices and select one that offers affordable service.

How Do I Repair the Water Pressure in My Water Pump?  

Repairing the pressure will depend on what is causing the decrease in water pressure from your pressure switch. A specialist can reset it, but they may need to inspect your pressure switch and other components to address any existing issues.

well water flowing through pump

What is Involved in Well Pump Repair? 

The process typically involves:

  • Diagnosing the problem.

  • Replacing faulty or worn parts.

  • Repairing existing components such as your pressure tank and pressure switch.

It may also need to be adjusted depending on the type and extent of the damage. In some cases, it may even require a new well pump if the damage is too severe. An experienced pump professional can help you determine what steps must be taken and ensure that your well system is restored to proper working order as quickly as possible.

My Well Pump is Not Working. What do I do?  

If your well pump is malfunctioning, contact an experienced professional. A professional well specialist can diagnose and repair your well’s issues, such as a drop from your pressure switch, air lock, insufficient water flow, or a broken pressure tank.

Once they have identified the issue, they can recommend the best action for repairing your well pump, including replacing parts, adjusting the pressure gauge and switch, or installing a new water system.

WildHeronDrilling: Your One-Stop Solution for Well Pump Repair

At WildHeronDrilling, we specialize in well pump repair and maintenance services. We employ experienced technicians well-versed in the latest well system technologies and techniques, ensuring that your well pump is fixed immediately.

We understand that a well pump can break down unexpectedly, so we offer emergency service to help get your well back up and running as quickly as possible. Our knowledgeable team of professionals can answer any questions about well systems maintenance.

If you’re looking for a reliable, professional well pump repair service, look no further than WildHeron Drilling! Contact us today by calling (916) 625-3807 or visit our website to learn how we can help you with your repairs.

Looking for Well Pump Repair Service?